| 1. |
 |
Why would I need to use Covalt Floor Leveling? |
| |
 |
No matter what type of flooring you decide to install, the surface under the new floor has to be strong And smooth, ensuring a long and proper wear life of the floor covering. |
| |
|
|
| 2. |
|
What is the difference between the Covalt underlayment system and standard floor patching materials? |
| |
|
Strength! Our high PSI durable systems improve the life of floor coverings and will limit failures & liability. |
| |
|
|
| 3. |
|
What is the drying and curing time of repair underlayments? |
| |
|
Most leveling materials dry in as little as three hours and can be worked on the very next day. |
| |
|
|
| 4. |
|
Are there any limitations on how thick underlayments may be poured? |
| |
|
No. Our systems may be installed from a featheredge to any thickness. |
| |
|
Back to the Top ^ |
| 5. |
|
Does Covalt floor Leveling have a system to repair old deteriorated and cracked Gypsum/lightweight concrete subfloors? |
| |
|
Yes, our fast track process allows us to repair and resurface rough and cracked subfloors without having to remove them. With the Covalt high strength products there is no need for time consuming removal and replacement with the same inferior product. |
| |
|
|
| 6. |
|
How long have you been in business? |
| |
|
Covalt Has been an inovator and pioneer in the floor leveling and resurfacing business for over 20 years. We are a company soley dedicated to making damaged subfloors smooth, flat, clean and level. |
| |
|
|
| 7. |
|
Can the Covalt resurfacing material be used to smooth out and level or make flat wooden subfloors? |
| |
|
Yes. As a matter of fact most all types of existing rough, unlevel or otherwise damaged floors can be resurfaced and repaired by Covalt Floor Leveling. |
| |
|
|
| 8. |
|
What are underlayment products made of? |
| |
|
Covalt only uses the finest materials available. Underlayments are ensinsentially cement based and polymer enhancedand and may exceed 5,000 psi compresive strength. |
| |
|
Back to the Top ^ |
| 9. |
|
Will the Covalt leveling system cause substantial delays on my project with regard to other tradesmen? |
| |
|
Absolutely not. Generally our repair system is a one day process.
Covalt can even perform installations on nights or weekends, at NO EXTRA CHARGE! |
| |
|
|
| 10. |
|
What is the approximate cost to resurface a subfloor? |
| |
|
Depending on the amount of square footage and the thickness of the leveling material needed to correct the problem, pricing can start as low as
$1.95 per square foot. |
| |
|
|
| 11. |
|
Can underlayment be installed over old existing ceramic or other types if tile? |
| |
|
Yes! Our materilas are commonly used to prepare and give a new smooth and flat surface so that flooring may be installed right over the top of the old floor. |
| |
|
|
| 12. |
|
Can your system be used to increase a subfloor thickness in order to meet desired elevations? |
| |
|
Yes. For example, typically when marble or stone flooring is laid it is at a much greater thickness than carpeting or wood flooring that may be installed adjacently. Underlayment materials may be poured in order for different types of flooring to meet flush together. |
| |
|
Back to the Top ^ |
| 13. |
|
Will Covalt Floor leveling be able to give me an estimate over the phone? |
| |
|
In many cases yes. With our experience and broad knowledge we know just the questions to ask in order to prepare a written quote. |
| |
|
|
| 14. |
|
Can "self-leveling" underlayments be used to create positive slope, or ramping transition areas? |
| |
|
Yes! Through various techniques your Covalt field applicator can accomplish just about any unique subfloor repair. |
